NSK 55TMK20 Clutch Release Bearing

The Brief Introduction of Clutch Release Bearings:
 

Clutch release bearing is one of the more important parts, car bad if the maintenance fails, will not only cause economic losses, and disassembling time quite trouble, take many hours.So, find out the clutch release bearing failure reason, and in the use of preventive maintenance and reasonably, to prolong the life of release bearing, improve labor productivity, achieving good economic benefit has important significance.

Clutch release bearing installed between the clutch and gearbox, the separation of bearing loose tube on the first shaft transmission tubular extension part of the bearing cover, release bearing by return spring convex fork shoulder always resist separation, and return to the last position, and separation of lever end (separation) keep about 3 ~ 4 mm gap.

Japan Truck Parts Clutch Release Bearing :Because the clutch pressure plate, separate leverage and engine crank synchronous operation, and the separation of the fork can only move, the clutch output shaft axis with separation fork to dial directly separate lever is obviously not enough, by rotating a separation bearings can make separation lever side edge of the clutch output shaft axial movement, so as to ensure the clutch can engage a smooth, separation of downy, reduce wear and tear, prolong the service life of the clutch and the whole drive train.

Clutch Release Bearings Catalog: